Audi MOT check
Free Audi MOT check by registration: full MOT history, advisories and recorded mileage. MOTCheck is an independent website. It is not DVSA, DVLA or GOV.UK. MOT history here uses DVSA MOT data for vehicles in England, Scotland and Wales. Northern Ireland tests are not included.
Audi shares a lot of underpinnings with Volkswagen Group cars, so the MOT themes are familiar: springs, drop links, CV boots and, on older diesels, emissions notes. Quattro models add tyre wear on a heavier four-wheel-drive car. Read the individual history.
A Audi MOT history check is the record of tests for one vehicle, not a rating of every Audi. Enter the registration to see each test the record holds: the date, the pass or fail result, the mileage the tester recorded, and the advisories and defects written up that day. Where a current certificate is on file, the report also shows the MOT expiry date. MOTCheck uses DVSA MOT data. It is not a government service and it is not affiliated with the DVSA or DVLA.
Read the tests from the oldest to the newest. A one-off advisory for a tyre, a lamp or a wiper blade is ordinary, because those parts wear out. The same suspension, brake, corrosion or emissions note on two or three tests in a row is more useful: it means the item was noticed and left. Mileage should rise by a plausible amount for how the car was used. A reading that falls, or a long gap between tests, is a reason to ask the seller for an explanation before you agree a price.
An MOT pass means the vehicle met the minimum standard on the day of the test. It is not a service history, a warranty, or a check of the engine, clutch, gearbox or cambelt, and it does not show finance, write-off or accident records. Lamps, tyres, brakes, suspension, steering, visibility and corrosion are examined on a normal car or van MOT. On a Audi, start with those sections and then read the notes below. They describe issues owners and testers often come across. They are not a prediction for any particular car, and they are not pass-rate statistics.
Common Audi MOT failure and advisory areas
These are the areas worth reading on a Audi certificate. They are qualitative notes about lamps, tyres, brakes, suspension and similar items. They are not failure rates and they are not a prediction for a particular car.
Springs and drop links
Coil springs and anti-roll bar links are written up on A3s and A4s in the same way they are on Golfs and Passats. A repeated note means the part was still worn at the next test.
CV boots and driveshafts
Split gaiters are a common advisory. They are cheaper to sort when the joint is still quiet. The certificate will not tell you whether the joint already clicks on a full lock.
Warning lamps that become defects
An engine, airbag, ABS or emissions lamp that stays on can be an MOT defect. The history shows if that happened at a previous test. It does not show a lamp that was switched off before the test.
Tyres on heavier models
A4, A6, Q3 and Q5 models put more load through the tyres. Inner-edge wear is worth looking for if a previous advisory mentions uneven tread.
Popular Audi models
A3
The volume hatch and saloon. Springs, links, brakes and tyres are the usual notes. Compare mileage on cars that were company transport.
A4
A common saloon and avant. Read suspension and, on older diesels, emissions notes. A long, steady mileage record is easier to judge than two tests far apart.
Q3 and Q5
Crossovers and SUVs. Weight shows up in tyre and brake wear. Check that any tyre advisory names the position, and look at that corner on the car.
A1
The smaller hatch. Histories are often short and ordinary: lamps, tyres and brakes. Older A1s still deserve a look at springs and bushes.
What to check before buying a used Audi
Ask which suspension notes were actually repaired. On a quattro, look at all four tyres for matching wear and for a mix of brands, which can be an MOT and handling issue. A clean last test with a thin history is not more reassuring than a longer history of minor, repaired advisories.
Before you buy a used Audi, match the registration on the advertisement to the report, then read the latest advisories against the car in front of you. Budget for anything that has already been noted more than once. If the seller cannot explain a mileage drop or a failed test, pause and have the car inspected. A free history check is a starting point, and a pass on its own does not mean the car is a sound buy.
Questions about a Audi MOT check
What does a Audi MOT history check show?
It lists the MOT tests recorded for that Audi: pass and fail results, the mileage written down at each test, advisories, defects and the MOT expiry date when one is on file. MOTCheck uses DVSA MOT data. It is not a government service and it is not affiliated with the DVSA or DVLA.
What should I read first on a used Audi?
Start with springs and drop links, cv boots and driveshafts, warning lamps that become defects, tyres on heavier models. Coil springs and anti-roll bar links are written up on A3s and A4s in the same way they are on Golfs and Passats. A repeated note means the part was still worn at the next test.
Does an MOT pass mean a used Audi has no problems?
No. A pass means that Audi met the test standard on that day. It does not cover service history, the engine, the clutch, the gearbox or outstanding finance. Read the advisories, compare the mileage from test to test, and have the car inspected before you buy.
Which Audi models can I check?
Any Audi with a UK registration. The notes on this page mention the A3, A4, Q3 and Q5, A1 because those are common used examples. They are general. The report for the registration you enter is the one that applies to that vehicle.